New Build Homes in Ockbrook, Derbyshire

New Build Homes in Ockbrook: how we approach the work

Our new build home service in Ockbrook starts with a measured survey of your house rather than a generic quotation. Designing and building a house from the ground up on a plot, a garden plot or a replacement-dwelling site — planning, engineering, groundworks, structure, services and finishes under one contract.

The technical crux on most Ockbrook projects is ground investigation and foundation design, drainage and utility connections, and meeting current energy and overheating standards. We resolve these on paper first — with a structural engineer where the work needs one — and price the job on what is actually there.

Planning in Ockbrook: A new dwelling always needs full planning permission and, on most sites, supporting documents such as a design and access statement, drainage strategy and sometimes ecology or highways reports. We check the constraints for your specific address, including any planning history, and tell you plainly which route applies before drawings are commissioned.

Why Ockbrook homeowners use a local design and build team

We are a local design and build contractor, not a national lead-generation site. Ockbrook is roughly 11 miles from Nottingham, which means the same team that surveys your house is the one that designs it, prices it and builds it.

Cost is driven by floor area and form, ground conditions and foundations, utility and drainage connections, specification of envelope and glazing and kitchens, bathrooms and finishes. We do not publish a rate per square metre because it misleads more often than it helps; you receive an itemised, written fixed-price quotation after the survey so you can see what each element costs and what changes it.

We do not invent projects, reviews or statistics to fill a page. What we can promise is a written programme, weekly updates, building control certification handed over at the end, and a twelve-month defects period during which we return to put right anything that fails.

Planning permission in Ockbrook: Erewash Borough Council

The local planning authority for Ockbrook is Erewash Borough Council. Any application for your new build home — householder planning permission, a lawful development certificate or prior approval — is submitted to Erewash and decided against its adopted local plan and national policy. The council's planning team can be reached by email at Planning@erewash.gov.uk, and applications are made through its own planning pages or the national Planning Portal.

A new dwelling always needs full planning permission and, on most sites, supporting documents such as a design and access statement, drainage strategy and sometimes ecology or highways reports.

Prior approval (larger home extension): A deeper single-storey rear extension can be built under the neighbour consultation scheme: the council notifies the adjoining owners, and if any of them object the council decides whether the impact is acceptable. It has to be notified before work starts, not afterwards.

Party walls sit outside the council process entirely. Not a council process at all: the Party Wall etc. Act 1996 is a private notice served on the neighbour when work affects a shared wall, cuts into it, or excavates near their foundations. It runs alongside planning and building control, and being told about it late is what usually delays a start on site.

Before anything is drawn we check your address for the things that change the route: whether permitted development rights have been removed by a condition or an Article 4 direction, whether the property is listed or in a conservation area, any earlier planning decisions on the site, and the position of boundaries and highways.

In practice the order is: constraints check → measured survey → design that fits the route we have identified → submission to Erewash where an application is needed. Where the work is permitted development we recommend applying for a lawful development certificate, because it is the document that proves the position to a future buyer's solicitor.

Building regulations and building control in Ockbrook

Planning and building control are separate approvals. Even where your new build home in Ockbrook needs no planning application, the building regulations still apply, and the work has to be notified. For Ockbrook that means Erewash Borough Council's own building control team, which also covers Ashfield, Broxtowe and Mansfield, or a registered building control approver of your choice. That team can be contacted on 0115 907 2233 or at buildingcontrol@erewash.gov.uk. We make the submission and manage it for you.

Building notice: A shorter route for straightforward work: the job is notified and then inspected as it proceeds, with no prior plan check. Faster to start, but the risk of a change being required mid-build sits with the owner.

Ground investigation and foundation design, drainage and utility connections, and meeting current energy and overheating standards. Those are the elements building control looks at, alongside insulation and airtightness, fire safety and escape, ventilation, drainage, glazing, and the safety of electrical and any gas work.

Inspections happen at set stages rather than all at the end — typically excavation and foundations before concrete, drainage before it is covered, the structural frame or beams once installed, insulation and damp proofing before they are hidden, and a final inspection on completion. We book these and meet the inspector on site so nothing is buried before it is signed off.

At the end you are handed the building control completion certificate, structural calculations, electrical certification, gas paperwork where relevant, and any planning or lawful development documents. Keep them together: this is the pack a buyer's solicitor asks for when you sell.

The process, step by step

1. Site visit in Ockbrook: we measure, look at the constraints — boundaries, drainage, structure, roof — and talk about what is not working in the house now.

2. Options and cost range: sketch options with an honest range, before detailed drawings.

3. Approvals: permitted development check, lawful development certificate or planning application as your address requires, plus building control submission.

4. Engineering and fixed price: structural calculations completed, then a written fixed-price quotation with a stage programme.

5. Build: typically nine to fifteen months on site for a single house, after planning and detailed design. New builds are built empty; where you are replacing a dwelling you live in, we plan the sequence and timing with you.

6. Completion: snagging closed out, building control completion certificate issued, defects period begins.

Types of new build homes we take on in Ockbrook

In Ockbrook and the surrounding area we take on single self-build homes, replacement dwellings, garden and infill plots, detached and semi-detached pairs, bungalows and chalet homes and energy-efficient new homes. Housing stock varies street by street across Derbyshire, so each project is designed for the actual house rather than adapted from a standard drawing.

Read the full New Build Homes guide for design options, planning rules and what drives cost.

Areas we cover near Ockbrook

From Ockbrook we also cover Borrowash, Spondon and Breaston, and the wider Derbyshire area within roughly twenty-five miles of Nottingham. If you are just outside Ockbrook, tell us the postcode and we will confirm.

• New Build Homes in Borrowash
• New Build Homes in Spondon
• New Build Homes in Breaston

Talk to us about your Ockbrook project

The useful next step is a conversation about your actual house. Call us or send a WhatsApp message and we will arrange a visit to Ockbrook, look at the constraints properly, talk through the planning route for your address and follow up in writing with options and a realistic cost range.

New Build Homes in Ockbrook: questions homeowners ask